tech: super cobra dip switch question

Hello,

I recently got a super cobra pcb. I installed it in my scramble machine
and it boots up perfectly. The only problem is that when I put a
quarter in the game I get three credits and not one. I would like to
set it up to only get one credit per quarter. I checked KLOV for the
manual and the section where it says how to set the dip switch setting
is really confusing. I set it up so that dip switchs are 1/off 2/off
3/on 4/on 5/off 6/off. This looks like how it should be set up, but if
anybody could tell me what I'm doing wrong or how to set it up, I would
be very greatful.

Thanks,
Mike

Let me elaborate on my dip switch problem. In the manual on KLOV, when
it gets to the part of the dip switch settings that control what the
coin door does it shows two columns to the left of the dip switch
settings. One is labeled "1 way" and the other is labeled "2 way".

Where it says 1 coin 1 play is listed under the "1 way" coloumn and
directly next to it it says 1 coin 3 play under the "2 way" coloumn,
then next to it, it says dip 4 on and dip 5 off. When I try this
setting I get the 1 coin 3 play. I tried some other variations of these
dip switches and have always had the same result of 1 coin 3 plays.
Does anybody have some insight into what I can do to solve this problem?

Thanks,
Mike