Need help on building mame machine

On 2006-12-19, SINNER <99nesorjd.TakeThisOut@gates_of_hell.invalid> wrote:

> is is like going to the store and getting milk, eggs, sugar and
> condoms?

That's a hell of a recipe!

www.pleasuredome.org.uk for rom downloads.

--
Blast off and strike the evil Bydo empire!
 >> Stay informed about: Need help on building mame machine 

MUSTANGS7981.RemoveThis@HOTMAIL.COM wrote: I did the dirty , it felt good!

> I am wanting to build a mame machine but am having trouble finding
> places to download all the roms and also how to wire the whole thing
> up. Any help would be greatly appreciated. Please feel free to show
> pics of your mame machines.

http://arcadecontrols.com/arcade.htm

Most of the info and other machines you will need.
 >> Stay informed about: Need help on building mame machine 

Thanks guys for the help. I am gonna build the cab from scratch. Hope
to have done within a month but u know how that goes. I am new to this
so it may take longer. I will keep checking back with the progress and
if I have any questions.
Super Mappy wrote:
> Skenny wrote:
>
> > If you get frustrated (I did more than once or twenty times), just take
> > a break and let it rest for a few hours.
>
> Very true, one of the best pieces of advice is take your time and do it
> correctly.
>
>
> --
> Bustin' Naughty Folks since 1983
>
> See my custom built upright and cocktail cabinets at:
> http://home.columbus.rr.com/supermappy/
>
> Come to chat in #tombstones on preacher.foreverchat.net:6660-6667,7000
> or http://www.tombstones.org.uk/?page=chatroom for javachat
>
> MAME: Forever Young!
 >> Stay informed about: Need help on building mame machine 

MUSTANGS7981 DeleteThis @HOTMAIL.COM wrote:
> I am wanting to build a mame machine but am having trouble finding
> places to download all the roms and also how to wire the whole thing
> up. Any help would be greatly appreciated. Please feel free to show
> pics of your mame machines.
>
If you are planning on building your own cabinet:
I just finished my second one. Sorry, I didnt take time to take many
pictures.
Just a word(s) of advice:
If you use MDF board, do the cutting outside. It puts off a lot of dust,
you might want to wear a cheap paper mask (respirator) over your nose
and mouth. (Be extremly careful with the saws)
Measure twice (or three times) and cut once.
Dont primer and paint until you have the cabinet together, or at least
dont paint and primer the edges of the pieces, because the paint takes
up more room than one would imagine. (Im talking about where the edges
of two pieces meet.)
Check back here often, and check the links the other guys posted for you.
As far as the software and wiring, I have found the biggest help from
these guys..
Good luck, and have fun...
If you get frustrated (I did more than once or twenty times), just take
a break and let it rest for a few hours.
 >> Stay informed about: Need help on building mame machine 

Skenny wrote:

> If you get frustrated (I did more than once or twenty times), just take
> a break and let it rest for a few hours.

Very true, one of the best pieces of advice is take your time and do it
correctly.


--
Bustin' Naughty Folks since 1983

See my custom built upright and cocktail cabinets at:
http://home.columbus.rr.com/supermappy/

Come to chat in #tombstones on preacher.foreverchat.net:6660-6667,7000
or http://www.tombstones.org.uk/?page=chatroom for javachat

MAME: Forever Young!
 >> Stay informed about: Need help on building mame machine 

Skenny wrote:
> MUSTANGS7981 RemoveThis @HOTMAIL.COM wrote:
>
>>
> If you are planning on building your own cabinet: I just finished my
> second one. Sorry, I didn't take time to take many pictures. Just a
> word(s) of advice: If you use a circular saw, do the cutting outside.
> I cut off a lot of fingers and the blood stained my Mom's wood
> floors. you might want to wear a latex rubber (condom) over your nose
> and mouth. (Be extremely careful with the saws) I cut myself twice
> (or three times) in the arm and cut my ankle once. Don't primer and
> paint until you have the bleeding stanched, or at least don't paint
> and primer the edges of your cuts, because the blood takes up more
> room than one would imagine and really stings. (I'm talking about
> where the tendons where two ligaments meet.) Check back here often,
> and check the links the other local fire department posted for you.
> As far as the software and wiring, I have found the biggest help from
> these guys.. Good luck, and have fun... If you get frustrated (I did
> more than once or twenty times), just take a break and drink good
> scotch which is loaded in antioxidants.

Wow, I sure hope those fingers grow back, Skenny.
--
FSogol
 >> Stay informed about: Need help on building mame machine 

http://www.mame-roms.co.uk/ this the website of a burner that is good. get
everything all at once but it will cost you a little money. an go to
ultimarc and you will get info on the encoder for the buttons and sticks it
is fairly easy and straight forward to wire everyswitch gets hooked to
negative then you wire the other side of the switch to the corresponding
post on the ultimarc ipac trackballs and spinners need a an optipac. the
optipac and ipac plug into the computer by way of usb ports.
 >> Stay informed about: Need help on building mame machine 

FSogol wrote:
> Skenny wrote:
>
>> MUSTANGS7981 DeleteThis @HOTMAIL.COM wrote:
>>
>>>
>> If you are planning on building your own cabinet: I just finished my
>> second one. Sorry, I didn't take time to take many pictures. Just a
>> word(s) of advice: If you use a circular saw, do the cutting outside.
>> I cut off a lot of fingers and the blood stained my Mom's wood
>> floors. you might want to wear a latex rubber (condom) over your nose
>> and mouth. (Be extremely careful with the saws) I cut myself twice
>> (or three times) in the arm and cut my ankle once. Don't primer and
>> paint until you have the bleeding stanched, or at least don't paint
>> and primer the edges of your cuts, because the blood takes up more
>> room than one would imagine and really stings. (I'm talking about
>> where the tendons where two ligaments meet.) Check back here often,
>> and check the links the other local fire department posted for you. As
>> far as the software and wiring, I have found the biggest help from
>> these guys.. Good luck, and have fun... If you get frustrated (I did
>> more than once or twenty times), just take a break and drink good
>> scotch which is loaded in antioxidants.
>
>
> Wow, I sure hope those nuts are OK, Skenny.

Rest easy little guy, the nuts are fine and waiting for you,,,
 >> Stay informed about: Need help on building mame machine