Definitely sounds like a power supply issue.
Check the voltage arriving at the edge connector of the board with a
multimeter and verify you are getting the +12 and +5 volts.
The board will boot without the +5, but you definitely need both for it to
function correctly.
Cheers,
Mike
"squish" <none RemoveThis @000.com> wrote in message
news:1473575_a3f2fa1e8b73135e810b476055f322de@gamehourz.com...
> Hello there, I have a problem with my 1988 SNK P.O.W. coin op game.
> When I turn the power switch on the marquee lights up and the monitor
> comes on but without picture or sound. I have located and checked 2
> fuses inside the cabinet and both are working. As far as I can tell it
> seems the board is not getting power. (there are 2 little red
> indicator lights on the board that currently do not light up while the
> games power is on.) If anyone has some information or any suggestions
> about what to do, they would be greatly appreciated. Thanks, Squish.
>
> --
> Posted at author's request, using moderated http://www.GameHourz.com
> interface
> Thread archive: http://www.GameHourz.com/Tech-Problem-ftopict237387.html >> Stay informed about: Tech: P.O.W. Problem