Super Punch-Out reproduction side decals to be produced

We are looking for people interested in buying a set (two decals, one
for each side of the machine).

The decal in question is approximately 18" x 10" and is placed above
the regular Punch-Out side art when converting to Super Punch-Out. It
says "Super" on it and looks like this - http://maxim.skyphix.com/super.jpg

This illustration from the SPO manual shows where they are applied on
the machine - http://maxim.skyphix.com/super_decal.png

I have an NOS decal that I scanned in at 600 DPI and vector traced.
The NOS decal will also be used by the screen printer for color
matching. The original decal has portions that are a metallic silver-
gray in color, and I was concerned about them being able to recreate
that. I visited their place today to show them the decal and they
showed me a piece they were doing for L.L. Bean which used a nearly
identical metallic silver-gray ink, so that part should be no
problem.

These will be screen printed (AKA: silk screened), 3 colors, with the
black being halftoned to represent the gradients (which is how the
original was done), onto white self-adhesive vinyl, and cut to the
outside shape on a plotter.

When looking at the original, they noted that it was laminated, which
gives it a glossy appearance. They showed me a piece they had done
that was laminated in the same way, and the finish/gloss was
identical.

The cost was originally estimated at $26 per decal, but with
lamination, it was estimated at $27 per decal ($54 per set). I know it
is a bit pricey, but it is a small run (minimum order of 24 pieces).

Anyone interested in buying a set for a Punch-Out or Super Punch-Out
machine will only need to pay actual cost.

E-mail me or post here if you are interested in a set, or if you have
any questions.