Sprint 2 voltage question

I have a Sprint 2 Power Supply question any help appreciated.I checked
the voltages at the edge connector and at pin 3 and 4 the voltage was
19.5VAC should be 16.5VAC according to the pinout.Also the 25VAC
measured 28.8VAC These voltages were taken prior to the board being
plugged in of course.How exact do these ac voltages need to be are
these readings safe to plug the board in or do they need to be pretty
close to exact.I know some power supplies in some games make the
voltages high to allow for the edge connector connection.Also some
boards have the return line which adjusts the voltage but I dont know
on a Sprint 2 board.If you could let me know what you test them at or
how exact they have to be that would be great....Thanks in
advance....Dave

On Feb 9, 3:10 am, "Vaxx" <vax... DeleteThis @hotmail.com> wrote:
> standard with the ac voltages to be a little high. They are regulated on the
> pcb itself."Dave27" <arca... DeleteThis @verizon.net> wrote in message
>
> news:617d5d42-f098-4cd6-82fb-b27c9ca1f8a3@q21g2000hsa.googlegroups.com...
>
>
>
> >I have a Sprint 2 Power Supply question any help appreciated.I checked
> > the voltages at the edge connector and at pin 3 and 4 the voltage was
> > 19.5VAC should be 16.5VAC according to the pinout.Also the 25VAC
> > measured 28.8VAC These voltages were taken prior to the board being
> > plugged in of course.How exact do these ac voltages need to be are
> > these readings safe to plug the board in or do they need to be pretty
> > close to exact.I know some power supplies in some games make the
> > voltages high to allow for the edge connector connection.Also some
> > boards have the return line which adjusts the voltage but I dont know
> > on a Sprint 2 board.If you could let me know what you test them at or
> > how exact they have to be that would be great....Thanks in
> > advance....Dave- Hide quoted text -
>
> - Show quoted text -

Cool thanks I recieved an e-mail allready stateing what you just
said......I plugged it in and it works great.....Thanks for your time
though.....Dave