Welcome to GameHourz.com!
FAQFAQ   SearchSearch      ProfileProfile    Private MessagesPrivate Messages   Log inLog in

MS Pac tech help

  
   Game Forums (Home) -> Arcade Collecting RSS
Related Topics:
tech: DDK help please - Hi. I finally got my DDK sounds back. Not sure if it was reseating the chips, redoing the audio board or something else. I reseated the chips (all chips) I now only have Jr and no DK. The menu comes up asking for both but I can't get to..

Tech: One Hot ROM - What would make a single ROM out of a bank of many run hot? The rest are cool as the cucumber. Daniel

TECH: Klax - I know it's not the most desirable game in the land, but I managed to acquire a dedicated upright Klax in pretty decent shape. The bad: PCB did not have sound. I figured I could deal with that. Maybe a sound amp or I took delivery of the..

TECH:Another resetting Pac - OK,I had 2 working Pac boards that I converted to run the Ms Pac/Pac hack using a 27512 @6J and a 27128 @5F and using the cabinet test switch to go between the two both boot up and run to the exact same spot in the program then

TECH: NEED MS PAC BOOTLEG HELP - My Ms pac bootleg is the 36 pinout ver need to get it out of cocktail mode at on the pinout page states this "* May be missing cap & resistor to go out of cocktail mode. Many of these boards are hardwired this way for use in cocktail caps...
Next:  -crawl- Please save my savegame !  
Author Message
jrpuddu

External


Since: Feb 07, 2006
Posts: 67



(Msg. 1) Posted: Sun Apr 30, 2006 11:34 pm
Post subject: MS Pac tech help
Archived from groups: rec>games>video>arcade>collecting (more info?)
I have a Ms Pac that comes up with the white grid. Its not in test
mode so any ideas?

 >> Stay informed about: MS Pac tech help 
Back to top
Login to vote
matt

External


Since: May 01, 2006
Posts: 9



(Msg. 2) Posted: Mon May 01, 2006 5:55 am
Post subject: Re: MS Pac tech help [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)
On 30 Apr 2006 23:34:34 -0700, jrpuddu.TakeThisOut@yahoo.com wrote:

>I have a Ms Pac that comes up with the white grid. Its not in test
>mode so any ideas?
>

Possibly one or more bad ROMs/EPROMs.

 >> Stay informed about: MS Pac tech help 
Back to top
Login to vote
Greg Baumgratz

External


Since: Apr 14, 2006
Posts: 11



(Msg. 3) Posted: Mon May 01, 2006 5:53 pm
Post subject: Re: MS Pac tech help [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)
Isn't there a input that when activated during the test mode causes the
grid pattern to stay up for monitor adjustments? I believe there is -
check the manual and then look for stuck inputs on the board - possibly
bad buffers.

Greg



matt wrote:
> On 30 Apr 2006 23:34:34 -0700, jrpuddu.TakeThisOut@yahoo.com wrote:
>
>
>>I have a Ms Pac that comes up with the white grid. Its not in test
>>mode so any ideas?
>>
>
>
> Possibly one or more bad ROMs/EPROMs.
 >> Stay informed about: MS Pac tech help 
Back to top
Login to vote
Display posts from previous:   
   Game Forums (Home) -> Arcade Collecting All times are: Ekaterinburg, Islamabad, Karachi, Tashkent (change)
Page 1 of 1

 
 You can post new topics in this forum
You can reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



[ Contact us | Terms of Service/Privacy Policy ]